Low Built Cranes
![[object Object] - 1](https://www.tawi.com/cdn-cgi/image/quality=60,width=2560,format=auto/globalassets/productimagestawi/210456_tawi-bv-ad-van-geloven-2011-vm120-bag-food-2-600x676.jpg.webp?ref=D6F9BDDFA7)
![[object Object] - 2](https://www.tawi.com/cdn-cgi/image/quality=60,width=2560,format=auto/globalassets/productimagestawi/210457_pendik-novartis-turkiet-2-1920x1283.jpg.webp?ref=A14BF0BBDE)
Low Headroom Solution
The ideal solution for facilities with limited headroom.
- For seamless operations
- Offering the longest possible stroke length
- Offering the best use benefit over structural cost ratio
What We Can Lift
When to use low built cranes
Choose a TAWI low built crane minimize the construction height of the system.
- Enable girder crane lifting in low ceiling facilities
- Integrates greatly with your facilities
- Lifting capacity: <275/3300 lbs
- Max suspension distance: <6000/8000 mm
- Bridge span: <6000/8000 mm
- Profiles: LR86, LR113, LR120, LR170
Low built cranes - for limited headroom or seamless operations
If you´re looking for a solution that snugs very closely to the ceiling, either for height constraints or for the sake of flush operations, TAWI low built cranes might be your answer.
When there is limited headroom, a crane which builds only 12 inches in height could give you those extra inches to be able to get a TAWI girder crane system into your operations.
Facilities with low headroom can mean both where workforce barely stand straight but also where material handling trucks might need that extra space in order to operate sufficiently. The low built crane system is a compact solution, primarily designed to allow a maximum possible vertical hook stroke in areas with low headroom. The low construction height is achieved by holding the girder and rails at the same level, thus saving space.
Even if your facility has no physical constraint in headroom, with the low built crane system you can achieve a workplace with a great use-benefit over structural-cost ratio, i.e. where the assisting girder crane system really gets out of the way, so the workstation can be more focused on solving the operational need. So, if you just want to reduce visual stimuli, straggly edges, moving parts to create a truly integrated facility, the TAWI low built cranes are for you. In both cases, this means a structure that sits as flush with the ceiling as possible, optimal for your flush operations.
Contact us and we can design a solution that optimally fits your operational requirements.